Vapefly Holic MTL RDA Clearomizer
The Vapefly Holic MTL RDA was designed by Vapefly and the Japanese vape reviewer --- HORICK TV. It is supplied with 360 ° ambient air flow with 6 levels of air flow control on the bottom and side of the RDA. It features a unique unlimited AFC system. The RDA also supports a single coil build. The deep groove at the bottom prevents leakage effectively. The RDA also supports "bottom feed" with BF pin. This RDA is suitable for mouth-to-lung smoking.
Content Vapefly Holic MTL RDA Clearomizer
1 x Holic MTL RDA
O-rings & Screws
2 x screwdrivers
2 x Firebolt cotton
2 x Ni80 26ga Pre-built coils 1.0ohm
1 x Bottom feeding pin
2 x Airflow control sets
1 x Adapter ring
1 x spare bag
1 x Manual
Properties Vapefly Holic MTL RDA Clearomizer
Diameter: 22.2 mm;
Material: stainless steel;
Height: 45.7 mm;
Material of the trip tip: Delrin, PMMA
Coil type: single coil
What else do I need for this RDA to be able to vaporize?
1. coil Wire
There are different types of coil wires, as these are available in Nickel, Kanthal A1, Titanium, Stainless Steel
/ SS wire so look for
a look around what best suits you. This thread is important for the liquid absorbed by the cotton to evaporate. 2. Cotton "Wicks"
Wick come in different types of fabrics, the most common is cotton, also available in Silica, Organic Cotton Pads, Rayon Cotton, Bamboo and Mesh. If you have made a coil out of the coil wire, insert a wick here. click here for wicks, Katoen 3. Tools to make this coil.
To make a coil with a wick "piece of fabric" in it you need tools, you can have a coil of the coil wire rotate manually or automatically, there are already twisted coils. here you will find all the tools
4. a MOD
If the RDA dripper is assembled, you need another MOD, any mod with a 510 connection can be used with these Drippers, look around here for an ideal MOD.
Every mod is basically the same, the only difference is the control, Wattage and Modes.